Search

Filter

Category
Uses
Standards
EN388:2016 Abrasion
EN388:2016 Cut resistance
EN388:2016 Tear resistance
EN388:2016 Puncture resistance
EN388:2016 Cut resistance
EN 420:2003+A1:2009 Category
UNE-EN 388:2004 Abrasion
UNE-EN 388:2004 Blade Cut Resistance
UNE-EN 388:2004 Tear resistance
UNE-EN 388:2004 Puncture Resistance
EN 511:2006 Convective cold resistance
EN 511:2006 Contact cold resistance
EN 511:2006 Impermeability
EN 407:2005 Inflammability
EN 407:2005 Contact heat
EN 407:2005 Convective heat
EN 407:2005 Radiant heat
EN 407:2005 Small splashes of molten metal
EN 407:2005 Large masses of molten material
EN388:2016 Impact resistence
EN 407:2020 Inflamabilidad
EN 407:2020 Calor por contacto
EN 407:2020 Calor convectivo
EN 407:2020 Calor radiante
EN 407:2020 Pequeñas salpicaduras de metal fundido
EN 407:2020 Grandes masas de material fundido

Technical advice

 

Technical advisory service 48h. max. Consult

Catalogue Tomás Bodero

Catálogo Tomás Bodero PDF

Check our new general catalogue of products in which you can find different product series TB.

See catalogue online

Dragon There are 39 products.

Dragon Gloves

Dragon, solutions for those who are always in direct contact with danger. Dragon was born in 1999 developing a new complete range that covers most of the risks to which the police, security forces or firefighters are exposed daily..

  • Glove made of back and exterior cuff made of 100% polyester with water-repellent treatment.
    Water-repellent grain leather palm.
    Thermal insulating foam and warm polyester full lining.
    Waterproof, breathable and windproof membrane.
    Tightening strap with buckle on wrist.
    Adjustable cord with Tanka lock at end of cuff.
  • Collar with internal fabric. Composition: polyethylene H.T. 43% - polyamide 43% - glass fibre 14%
    External fabric. Composition: modacrylic 55% cotton 45%
    Measurements: width 24’5 cm - height 20 cm.
    Color:navy blue.
  • Glove made of amara synthetic leather palm.
    Elastic polyamide fabric on back.
    Textured polyurethane reinforcements.
    Full Dyntex® lining for cut protection.
    Neoprene back of cuff.
    Waterproof, breathable and windproof membrane.
    Covered adjustable adhesive strip closure.
    Touchscreen
  • Glove made of Softshell® fabric back and cuff.
    Amara palm.
    Digitized synthetic material reinforcements on palm.
    Full Shield® lining for cut and heat protection.
    Thermical elastane inner cuff.
    Waterproof, breathable and windproof membrane.
    Touchscreen technology on index and thumb.
    Elastic wrist adjustment. Adjustable...
  • Glove made of silicone FR Shield fabric on palm and reinforcements.
    Flame retardant fabric on back and cuff.
    Full Shield knit lining.
    Porelle waterproof membrane.
    Knuckles and phalanges with anti-impact protection.
    Tactile synthetic leather on index and thumb.
    Velcro closure adjustment.
    Entirely sewn with para-aramid...
  • Glove made of amara synthetic leather with bielastic polyamide fabric on back.
    Amara inner reinforcement on palm.
    Waterproof, breathable and windproof membrane.
    Full Dyntex® lining for cut protection.
    Touchscreen technology on index and thumb.
    Adhesive strip closure on wrist.
  • Glove entirely made of non-slip textured polyurethane.
    Bielastic polyamide fabric at joints.
    Full Dyntex® lining for cut protection.
    Adhesive strip adjustment on wrist.
  • Glove with best quality leather palm.
    Back made of bielastic polyamide fabric.
    Police screen printed.
    Full Dyntex® lining for cut protection.
    Neoprene cuff with adhesive strip.

  • Glove made of pigmented leather combined with Softshell® type fabric.
    Shoeller® Keprotec reinforcement on palm and side.
    Nubuck leather reinforcement on palm.
    Leather-coated synthetic rubber protection on knuckles.
    Full Dyntex® lining for cut protection.
    Waterproof, breathable and windproof membrane.
    3M® reflective patches on...
  • Back in polyester and elastane. Laminated in Polyester.
    Synthetic leather palm made of 3 steel sheets of 230 grs.
    Thumb and index finger tips in Amara synthetic leather with a rough silicone finish
    Palm lining in Para Aramid.
    Protection on fingernails and knuckles in synthetic leather
    Polyester laminated neoprene cuff.
    Faux...
  • Glove made of best quality grain leather with water-repellent treatment.
    Leather inner reinforcement on palm.
    Vein protection patch on back.
    Full Shield® lining for cut and heat protection.
    Adjustable adhesive strip closure.
  • Glove with fire-retardant, best quality grain leather on palm.
    Water-repellent Nomex® Ripstop back.
    Padded protection on phalanges and knuckles.
    12 cm safety cuff.
    Full Shield® lining until wrist for cut and heat protection.
    Adjustable elastic wrist and adhesive strip adjustment on safety cuff.
  • Under trousers made of technical fabric consisting of hollow fib re.
    With silver ions for antibacterial effect.
    6 ventilation ducts allowing sweat drainage.
    Insulating air cushion.
    Composition: 82% polyester - 13% polyamide - 5% elastane.
    Seamless.
    Cotton feel.
  • Long-sleeve under T-shirt made of technical fabric consisting of hollow fibre.
    With silver ions for antibacterial effect.
    6 ventilation ducts allowing sweat drainage.
    Insulating air cushion.
    Composition: 82% polyester, 13% polyamide and 5% elastane seamless.
    Cotton feel.
  • Long-sleeve under T-shirt made of technical fabric consisting of hollow fibre.
    With silver ions for antibacterial effect.
    6 ventilation ducts allowing sweat drainage.
    Insulating air cushion.
    Composition: 82% polyester, 13% polyamide and 5% elastane seamless.
    Cotton feel.
  • Glove with fire-retardant best quality goat leather palm.
    Back entirely made of extra-comfortable Nomex® knitted fabric.
    Long-cut cuff.
    Sewn with Kevlar® thread.
    Elastic wrist.
  • Glove entirely made of 100% Polar polyester.
    PU membrane.
    Reinforced grip on palm and index finger.